公司新闻

怎么减少水稳拌和站产生的不好影响

来源：http://www.ycgjglcl.com/ 日期：2022-10-28

在使用济南水稳拌和站的时候，难免会弄得工地上到处是尘土飞扬，而且也会产生很大的噪音，不过小编觉得可以通过以下方式来减少水稳拌和站产生的噪音及造成的环境污染问题。

When using Jinan Water Stable Mixing Station, it is inevitable that the construction site will be full of dust, and will also produce a lot of noise. However, Xiaobian thinks that the noise generated by the Water Stable Mixing Station and the environmental pollution caused by it can be reduced by the following ways.

1、注意天气变化。大家知道水稳拌和站都是露天工作，大风和暴雨天气是不适宜露天作业的，暴雨天会损伤机器，降低使用寿命，然而大风天气下作业，会造成沙尘弥漫，污染周边环境，所以在作业时注意天气预报，避免这种恶劣天气。

1. Watch the weather. As we all know, the water stabilized mixing station works in the open air. It is not suitable for outdoor operation in windy and rainstorm weather. The rainstorm will damage the machine and reduce its service life. However, the operation in windy weather will cause sand and dust to diffuse and pollute the surrounding environment. Therefore, pay attention to the weather forecast during the operation to avoid such bad weather.

2、远离居民区。水稳拌和站在作业时产生的噪音非常大，这就需要把站点建立在远离居民的地方，防止扰民。

2. Keep away from residential areas. The noise generated by the operation of the water stabilized mixing station is very loud, so it is necessary to build the station far away from the residents to avoid disturbing them.
济南水稳拌和站

3、经常对施工现场洒水。这样做的目的是为了保持现场土地湿润，干燥的地面容易起尘土，夏天洒水也容易降温。

3. Water the construction site frequently. The purpose of this is to keep the site wet. The dry ground is prone to dust, and watering in summer is also easy to cool down.

4、及时处理垃圾。水稳拌和站在工作过程中会产生大量的废料及垃圾，要及时对其场区的垃圾进行清扫并集中运渣土消纳场。

4. Dispose of garbage in time. The water stabilized mixing station will produce a large amount of waste and garbage in the process of work. The garbage in the site area shall be cleaned in time and transported to the waste disposal site.

此外水稳搅拌站在建设和生产过程中，会出现故障。搅拌主机闷车现象时有发生。这种故障多半是由于搅拌主机中的搅拌桨搅拌故障，带动搅拌主轴的闷车，直停止转动。所有这些故障也要多加注意，更多事项就来我们网站http://www.ycgjglcl.com咨询吧！

In addition, the water stabilized mixing plant will fail during construction and production. The main mixer is often stuck. This kind of failure is mostly due to the mixing failure of the mixing paddle in the mixing host, which drives the boring of the mixing spindle until it stops rotating. Pay more attention to all these faults, and come to our website for more information http://www.ycgjglcl.com Consult!

上一条：压路机注意三点能让您使用得心应手

下一条：沥青路面施工规范缺陷以及其他影响